Stainless steel clasp. The closure is completely made of stainless steel and suitable for sticking 3 mm thick tapes. The lobster claw clasp has a size of 10 mm and the entire closure has a length of approx. 3.3 cm. The tape is simply glued into the end caps.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
lobster claw clasp 12x7mm made of stainless steel silver colored.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
lobster claw clasp 19x12x5mm made of stainless steel.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
1 pair of stainless steel back studs. Size 6x5mm. Hole size approx. 1 mm
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Stainless steel clasp. The closure is completely made of stainless steel and suitable for sticking 2,5 mm thick tapes. The lobster claw clasp has a size of 10 mm and the entire closure has a length of approx. 3.3 cm. The extender chain has a length of about 5 cm. The tape is simply glued into the end caps.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Completely assembled closure made of stainless steel. The end caps are suitable for stringing silk that is knotted at the end or for steel wire rope where you then put a crimp bead at the end, which you insert into the closure. The ribbon or steel cable is threaded through the center into the crimp bead. The lobster clasp has a size of 10 mm. With the approx. 5 cm long extension chain, you can then additionally vary the length of the chain. Further dimensions can be seen on the photo in the article view.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Stainless steel clasp. The clasp is completely made of stainless steel and is suitable for bands up to 4mm. The lobster claw has a size of 12mm and the entire clasp has a length of approx. 3.5cm. The extender chain is approx. 4.5cm long. The individual end caps are 10.4mm long and 5mm wide. Simply insert the ribbon into the end caps and press the end caps firmly together with pliers.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
2 stainless steel end caps / end cap for gluing tapes with a diameter of 4mm. Outer dimension approx. 7x5mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Elegant stainless steel slide clasp for pearl necklaces. The clasp is 21mm long, 8mm wide and 5mm thick. The eyelets have a hole size of 1.2mm
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Elegant stainless steel gold colored slide clasp for pearl necklaces. The clasp is 21mm long, 8mm wide and 5mm thick. The eyelets have a hole size of 1.2mm
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Stainless steel toggle clasp. Length of the ring incl. eyelet 16.5mm. The ring has an outer diameter of 12mm. The eyelets have an inner diameter of 3mm. The bar is 18mm long and the whole clasp is 2mm thick..
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Extender chain with a length of approx. 5cm. The chain has an approx. 9x5x1mm plates as a final. The chain links have a thickness of 0.5mm and the eyelets a size of 3x4mm. The complete extender chain is made of stainless steel and gold coloured.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Calotte / squeeze calotte with threading hole made of stainless steel. The thread is threaded through the hole and the knot is placed in the calotte. If you thread with steel wire, the crimp bead attached to the end is placed in the calotte. After pressing together, a clasp can then be connected to the eyelets. Size 7,5x4mm, inner space 3,5mm, hole size of the eyelets 1,5mm. 1 piece. The multiple image is for illustration purposes only.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
2 stainless steel end caps / end cap for gluing tapes with a diameter of 3mm. Outer dimension approx. 6x4mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Stainless steel closure consisting of 2 end caps / end caps for gluing tapes with a diameter of 3mm and a double ring to pass the tapes. The end caps have a size of 7x3,5mm - inner diameter 3mm. This set is very nice for closing bracelets but also for chains.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The lock holds by counterpressure of the inner part. It is pressed one ax together and is released by pulling on both shutter parts. The closure has an inner diameter of 3 mm and an outdoor diameter of 4 mm. It is particularly suitable for rubber belts, but also for steel rope, textile and other belts. The tapes are simply glued into the closure.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
End cap/band clamp made of stainless steel suitable for tapes with a thickness of 2-3 mm. Size 10mmx4.5mm. The eyelet of the end cap has an inner diameter of 1 mm. The tapes are clamped into the cap with a pliers.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
1 pair of studs for earrings made of stainless steel in the gold color. Size 6x4,5x3mm. Hole size approx. 0,7 mm
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Clip ring or hanging clip for combining chains or as a chain hanger for charms etc. The ring is made of stainless steel and has an outer diameter of 13 mm. It is 6 mm wide and the clip opening is 8.5 mm, so it is suitable for chains up to 8 mm. The clip is pulled apart manually and pressed together again. It has a bendable eyelet with a hole size of 2.2 mm below. This special offer is 1 pcs.. The double illustration merely serves as a better illustration.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Loop closure made of stainless steel with a total size of 36x20mm. The hole size is suitable for 2x 5 mm tapes, which are glued side by side. See model photo for illustration.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
2 finishing caps/end cap made of stainless steel for bonding tapes with a diameter of 3 mm. Outside dimensions approx. 9x7mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Stainless steel click closure. The lock “clicks” firmly together by counterpressure and is released by pulling on both shutter parts. The closure has an inner diameter of 2 mm and an outdoor diameter of 3 mm. It is particularly suitable for rubber belts, but also for steel rope, textile and other belts. The tapes are simply glued into the closure.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
End cap/band clamp made of stainless steel suitable for tapes from 5-6 mm. The eyelet of the end cap has an inner diameter of 1.1 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
lobster claw clasp 12x7mm made of stainless steel.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration