Other Closures

Rhodium plated ring closure Each ring has a diameter of approx. 18 mm on the outside. The total length, when closed, is about 35 mm. This closure is especially suitable for the production of 3-row chains.

The platinum coloured brass end cap has a size of approx. 15x12 mm and is particularly suitable for finishing thicker crochet and thread chains. The inner dimension of the cap is about 10 mm. The necklace we glued in here. The hole size of the eyelet on the cap is approx.1.5mm.

2 pieces of dome/squid calottes with thread hole. The thread is threaded through the hole and the knot is placed in the dome. If you thread with steel rope, the quest bead fixed at the end is placed in the dome. After pressing together, a lock can be connected to the eyelets.

The gold coloured end cap is suitable for gluing tapes with a diameter of 5 mm. The eyelets and a.o. a lobster claw clasp can then be attached to the end caps to close the chain.

Closure/connector for closing ball chains. The closure has the dimensions 7x2.7 mm and is suitable for closing ball chains up to a thickness of 2 mm.

2 pieces of dome/squid calottes with thread hole. The thread is threaded through the hole and the knot is placed in the dome. If you thread with steel rope, the quest bead fixed at the end is placed in the dome. After pressing together, a lock can be connected to the eyelets.

Silver platinum colored gag closure. The ring has a diameter of approx.14mm.

Clip ring or hanging clip to combine chains or can also be used as a chain hanger. The ring is silver coloured and has an outer diameter of 25 mm. It is almost 4 mm wide and the clip opening is about 8 mm (inside diameter 16 mm). The clip has a spring technique.

2 end caps rhodium plated to close bands up to 3 mm. These end caps are particularly suitable for flat ribbons. The specially ribbed clamping plate prevents slipping out of the bands. Especially suitable for our fabric bands.

Spring ring closure – total length approx. 3 cm. Diameter ring outside approx.17mm. Colour: Silver

2 pieces end caps – tape clamps for clamping tapes up to a thickness of 4 mm. The end caps are gold coloured and have a length (without eyelet) of approx.6mm.

2 pieces end caps – tape clamps for clamping tapes up to a thickness of 4 mm. The end caps are blackened and have a length (without eyelet) of approx.6mm.

2 silver plated Tape clamps for our 10 mm PVC tapes. The tape clamps are slightly bent up, the tape is pushed in and then bent back together with a flat tong. The interchangeable threaded pin are then fastened by the eyelets of the tape clamps. (The picture of the finished ring is for illustration only). The tape clamps can of course also be used for other types of tapes of this size.

2 rhodium-plated encapsulations/band clamps 10x7mm. The end caps can be used for many types of tapes. The tapes are glued into the caps.

2 rhodium-plated Tape clamps for our 7 mm PVC tapes. The tape clamps are slightly bent up, the tape is pushed in and then bent back together with a flat tong. The interchangeable threaded pin are then fastened by the eyelets of the tape clamps. (The picture of the finished ring is for illustration only). The tape clamps can of course also be used for other types of tapes of this size.

2 rhodium-plated tape clamps 16x2 mm for our 16 mm wide cellular rubber bands. The tape clamps are slightly bent, the rubber is pushed in and then bent back together with a flat tong. The interchangeable threaded pin are then fastened by the eyelets of the tape clamps. (The picture of the finished ring is for illustration only). The tape clamps can of course also be used for other types of tapes of this size.

2 pieces silver-plated end caps for closing tapes up to 3 mm. These end caps are particularly suitable for flat ribbons. The specially ribbed clamping plate prevents slipping out of the bands. Especially suitable for our fabric bands.

Spring ring closure – total length approx. 3 cm. Diameter ring outside approx.17mm. Colour: Gold

Spring ring closure – total length approx. 3 cm. Diameter ring outside approx.17mm. Colour: It’s Rhodium.

Gold coloured extender chain with a length of approx.5cm. The chain has at one end a bendable eyelet/bindering to connect with the chain and on the other side a small drop as a terminating. The chain links have a thickness of 0.8 mm and the eyelets are about 3.5 mm wide.

This push-button closure has a diameter of just under 10 mm and a total length of approx. 17 mm. The ring is simply pressed over the ball like a pushbutton.

Clip ring or hanging clip to combine chains or can also be used as a chain hanger. The ring is platinum coloured and has an outer diameter of 20 mm. It is almost 4 mm wide and the clip opening is about 5 mm (internal screen knife 12.5 mm). The clip has a “spring technique”. It is set on both sides with clearly sparkling crystal stones.

Clip ring or hanging clip to combine chains or can also be used as a chain hanger. The ring is silver coloured and has an outer diameter of 20 mm. It is almost 4 mm wide and the clip opening is about 5 mm (internal screen knife 12.5 mm). The clip has a “spring technique”. It is set on both sides with clearly sparkling crystal stones.

Clip ring or hanging clip to combine chains or can also be used as a chain hanger. The ring is platinum coloured and has an outer diameter of 25 mm. It is almost 4 mm wide and the clip opening is about 8 mm (inside diameter 16 mm). The clip has a spring technique.