Completely mounted, rose gold colored closure for rubber cord, fabric tape, organza tape, textile tape, steel rope etc. The end caps are suitable for all bands up to 3 mm thickness. The lobster claw clasp has a size of 12 mm. With the approx. 4 cm long extender chain you can then also vary the length of the chain. The tape is simply inserted into the end caps of the closure and these are then pressed together with a pliers.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Stainless steel click closure. The lock “clicks” firmly together by counterpressure and is released by pulling on both shutter parts. The closure has an inner diameter of 3 mm and an outdoor diameter of 4 mm. It is particularly suitable for rubber belts, but also for steel rope, textile and other belts. The tapes are simply glued into the closure.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
One-sided pre-assembled steel rope, Premium High Quality, with a 10 mm, genuinely gold-plated, stainless steel Magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel Magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
One-sided pre-assembled steel rope, Premium High Quality, with a 12 mm magnetic clasp, color silver, for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
One-sided pre-assembled steel rope, Premium High Quality, with a 10 mm stainless steel Magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel Magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
One-sided pre-assembled steel rope, Premium High Quality, with a 10 mm magnetic clasp, color platinum, for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
One-sided pre-assembled steel rope, Premium High Quality with a 10 mm, gold coloured magnetic clasp, for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
One-sided pre-assembled steel rope, Premium High Quality with a 10 mm gold coloured magnetic clasp for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a magnetic clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose squeeze beads serve to close the other end at the closure.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Stainless steel clasp. The closure is completely made of stainless steel and suitable for tapes up to 3 mm. The lobster claw clasp has a size of 11 mm and the entire closure has a length of approx. 3.2 cm. The tape is simply inserted into the end caps and the end caps tightly pressed together with a pliers.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
One-sided pre-assembled steel rope, Premium High Quality, with a 11 mm stainless steel lobster claw clasp closure for threading bead chains and necklaces. The 0.5 mm thick, nylon coated steel rope has a length of 80 cm and can thus be shortened to the desired length. On one side is a stainless steel lobster claw clasp, which was attached to the steel rope with 2 squeeze beads. The 2 loose beads are used to close the other end of the blasting ring. Due to the closure with 2 squeezing beads and the blasting ring, this model is also suitable for very heavy chains.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Hose closure platinum colored for 8 mm hollow rubber/rubber hose. This is a very good and massive execution. The closure is simply pushed firmly into the hose on both sides. It provides a reliable hold.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Fully mounted, gold colored closure for bands up to 3 mm The lobster claw clasp has a size of 12 mm and the end caps are smooth outside and inside. In the end cap below is a small rehook that holds the tape. With the approx. 5 cm long extender chain you can then also vary the length of the chain. The tape is simply inserted into the end caps of the closure and these are then pressed together with a pliers.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Stainless steel clasp. The closure is completely made of stainless steel and suitable for sticking 5 mm thick tapes. The lobster claw clasp has a size of 12 mm and the entire closure has a length of about 4 cm. The tape is simply glued into the end caps.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Hose closure gold plated with eyelet for 3 mm hollow rubber/rubber hose. The eyelet has a hole size of approx. 2 mm. Pendants or other pieces of jewellery can be attached to the eyelet.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Hose closure silver plated with eyelet for 3 mm hollow rubber/rubber hose. The eyelet has a hole size of approx. 2 mm. Pendants or other pieces of jewellery can be attached to the eyelet.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The clasp has an internal dimension of 8x2mm. A tape with this size but also 2 bands with approx. 4x2 mm can be attached next to it. The tape is glued into the clasp. The clasp is platinum colored.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Silver coloured toggle closure with blackened ornaments. The ring has a diameter of approx.15 mm and the gag has a length of 24 mm. The hole size on both parts is about 2 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Silver coloured toggle closure with blackened ornaments. The ring has a diameter of approx.15 mm and the gag has a length of 24 mm. The hole size on both parts is about 2 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Complete closure with a sleeve inner dimension of 5 mm for gluing tapes. Colour: It’s silver. The closure has a total length of approx. 45 mm and an external dimension of almost 8 mm. The tape is simply glued into the end caps of the closure.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Complete closure with a sleeve inner dimension of 4 mm for gluing tapes. Colour: It’s platinum. The closure has a total length of approx. 17 mm and an external dimension of 5.5 mm
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Stainless steel ring closure. 18x18x0,8mm. The chains can simply be hung in the eyelets of the lock. The hole size of the eyelets is about 2.1 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Rhodium plated plug with an internal cloth knife of approx. 1 mm. Outside approx. 1,6 mm. Length 5 cm. When using our nylon coated steel rope 0.5 mm, you can make 1-3 row steel rope colliers. 3x 0.5 mm for 3-row necklaces or a.o. 1x 0.7 mm for 1-row necklaces.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Hose closure for 3 mm hollow rubber/rubber hose.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Hose closure for 3 mm hollow rubber/rubber hose.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration