An open necklace loop made of stainless steel gold colored with dimensions 8,7x3,7mm. The beautiful and filigree loop is suitable for chains up to a diameter of 3 mm. The loop can also be bent.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Clip ring or hanging clip for combining chains or as a chain hanger for charms etc. The ring is made of stainless steel and has an outer diameter of 13 mm. It is 6 mm wide and the clip opening is 8.5 mm, so it is suitable for chains up to 8 mm. The clip is pulled apart manually and pressed together again. It has a bendable eyelet with a hole size of 2.2 mm below. This special offer is 1 pcs.. The double illustration merely serves as a better illustration.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open necklace loop made of stainless steel with dimensions 8,7x3,7mm. The beautiful and filigree loop is suitable for chains up to a diameter of 3 mm. The loop can also be bent.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, platinum coloured necklace loop for connecting chain and pendant in a solid finish. The inner dimension is approx. 13x5mm. The pendant can easily be “eingeclipt” into the necklace loop.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open necklace loop made of stainless steel with dimensions 11x7x8,5mm. The loop has a massive design and is suitable for chains up to a diameter of 6 mm. The loop can be bent and the pin in the middle has a thickness of 1.2 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open necklace loop made of stainless steel with thorn for hanging stones, pendants, etc. The “Clip” has a length of approx. 8 mm and the necklace loop has a total length of approx. 18 mm. The loop (eye) has an inner diameter of approx.3x4mm. 1 pcs.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, blackened necklace with thorn for hanging stones, pendants, etc. The “Clip” has a length of approx. 10 mm and the necklace loop has a total length of approx. 20 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Versatile connector element (charm carrier/charmscarrier) made of metal. It has a size of about 26x17mm. The upper eyelet has an inner dimension of approx.2.8 mm The 3 eyelets below into which you can hang a.o. lobster claw clasps of Charms have an inner dimension of approx. 2 mm. The element is silver coloured with antique look.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Versatile connector element (charm carrier/charmscarrier) made of metal. It has a size of about 26x17mm. The upper eyelet has an inner dimension of approx.2.8 mm The 3 eyelets below into which you can hang a.o. lobster claw clasps of Charms have an inner dimension of approx. 2 mm. The element is gold colored with antique look.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Rhodium plated pendant loop 15x4 mm for processing chain pendants etc. Hole size approx. 3.5 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, silver coloured necklace loop with thorn for hanging stones, pendants, etc. The “Clip” has a length of approx. 10 mm and the necklace loop has a total length of approx. 14 mm. The thorn has a thickness of 1 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, gold coloured necklace loop with thorn for hanging stones, pendants, etc. The “Clip” has a length of approx. 10 mm and the necklace loop has a total length of approx. 14 mm. The thorn has a thickness of 1 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, silver coloured necklace loop with thorn for hanging stones, pendants, etc. The “Clip” has a length of approx. 11 mm and the necklace loop has a total length of approx. 15 mm. The thorn has a thickness of 0.85 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The plate of this pendant holder has the dimensions of 6x8mm. Including eyelet, the pendant holder has a length of 11.5 mm. The eyelet has an internal diameter of 2 mm. Parts can be glued onto the plate and thus attached to chains, etc.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The plate of this pendant holder has the dimensions of 6x8mm. Including eyelet, the pendant holder has a length of 11.5 mm. The eyelet has an internal diameter of 2 mm. Parts can be glued onto the plate and thus attached to chains, etc.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Cap with thorn and necklace for sticking and hanging beads. The cap has a size of 7 mm and the thorn is 0.7 mm thick. The total length of the pendant is 15 mm. The necklace loop has a hole size of 3.6 mm. The pendant thus fits all our steel rope colliers with plug-in closure and on our 2 mm rubber colliers with click or bayonet closure. This hanger is optimally suited for the bead sizes 8-16 mm. (See model photo in the article detail view),
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, platinous coloured necklace loop with thorn for hanging stones, pendants, etc. The “Clip” has a length of approx. 9 mm and the necklace loop has a total length of approx. 12 mm. The thorn has a thickness of 0.85 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
This pendant is especially suitable for hanging donuts. It has a total length of about 4.75 m. The spiral that covers the hole of the donut has a diameter of about 25 mm. The eyelet of the pendant has an inner dimension of approx. 3.5 mm. This fits a lot of necklaces, because you can also make these a little bit up. This special offer is only the hanger, which you can see individually in the article detail view. The other parts depicted, such as the lavadonut and the Steel wire collier, can be ordered separately.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, gold coloured necklace loop with thorn for hanging stones, pendants, etc. The “Clip” has a length of approx. 6 mm and the necklace loop has a total length of approx. 16 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, platinous coloured necklace loop for connecting chain and pendant. The inner dimension is approx. 7x4mm. The pendant can easily be “eingeclipt” into the necklace loop.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, silver coloured necklace loop with thorn for hanging stones, pendants, etc. The “Clip” has a length of approx. 5 mm and the necklace loop has a total length of approx. 28 mm. The foliage covers the eye of the thorn.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, platinous coloured necklace loop with thorn for hanging stones, pendants, etc. The “Clip” has a length of approx. 10 mm and the necklace loop has a total length of approx. 20 mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, platinous coloured necklace loop with thorn for hanging stones, pendants, etc. The “Clip” has a length of approx. 13 mm and the necklace loop has a total length of approx. 24 mm. In the detailed view you can see a usage example with one of our Polarisquadrates. You can also use the necklace loop for our Polaris circles. 2 circle sizes can be combined with this necklace loop be held together,
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
An open, platinous coloured necklace loop with thorn for hanging stones, pendants, etc. The “Clip” has a length of approx. 8 mm and the necklace loop has a total length of approx.17mm.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration