Exchangeable rings - horizontal

2 rhodium-plated tape clamps 20x2 mm for our 20 mm wide cellular rubber bands. The tape clamps are slightly bent, the rubber is pushed in and then bent back together with a flat tong. The interchangeable threaded pin are then fastened by the eyelets of the tape clamps. (The picture of the finished ring is for illustration only). The tape clamps can of course also be used for other types of tapes of this size.

Ball 6 mm with female thread as end piece for threaded threaded pin or flashes – color platinum. The ball is screwed onto the threaded pin or flashes at the end. (Thread bars are to be ordered separately.

Rod with double thread, length 35 mm, rhodium plated. You need this rod a.o. to connect PVC flat strips for horizontal interchangeable rings. The beads are attached to the rod and the end parts are screwed on. It’s just the staff. The end parts must be ordered separately.

gold-plated, short, smooth tip with internal thread as end piece for threaded threaded pin or flashes. The tip is screwed onto the threaded pin or flashes at the end. (Threads or flashes are to be ordered separately.) The tip has a length of 7.8 mm and a diameter of 5.5 mm above.

genuine gold-plated, smooth cube, ca.4mm, with female thread as end piece for threaded threaded pin or flashes. The tip is screwed onto the threaded pin or flashes at the end. (Thread threaded pin or “flashes” are to be ordered separately.)

Smooth cube ca.4mm, with female thread as end piece for threaded threaded pin – color platinum. The cube is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.)

Short, smooth lace with female thread as end piece for threaded threaded pin – color platinum. The tip is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.) The tip has a length of 7.8 mm and a diameter of 5.5 mm above.

Spiral 10x6 mm with female thread as end piece for threaded threaded pin – color platinum. The ball is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.)

genuine gilded long lace with internal thread as end piece for threaded threaded pin or flashes. The tip is screwed onto the threaded pin or flashes at the end. (Thread threaded pin or “flashes” are to be ordered separately.)

Long lace with internal thread as end piece for threaded threaded pin – color platinum. The tip is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.)

The platinum coloured ring has a diameter of approx. 18 mm. The ring rail is about 4.55 mm wide. The rod is screwed up and tightened by means of a screwdriver. The beads that can be raised must have a hole size of at least 2.4 mm and must not be larger than 12 mm. (see also model photo in the article detail view)

This ring set contains the following articles: 1xMB05, 1xZS112, 2xZS103, 2x06, 1xPP10-523 This ring can be ordered with Polaris beads in many different colors.

Rod with double thread, length 25 mm, rhodium plated. You need this rod a.o. to connect PVC flat strips for horizontal interchangeable rings. The beads are attached to the rod and the end parts are screwed on. It’s just the staff. The end parts must be ordered separately.

Rod with double thread, length 25 mm. Colour: It’s gold. You need this rod a.o. to connect PVC flat strips for horizontal interchangeable rings. The beads are attached to the rod and the end parts are screwed on. It’s just the staff. The end parts must be ordered separately.

This complete interchangeable ring consists of 8 cm blackberry/pink coloured PVC tape and a threaded rod with 2 cubes. The cubes can be unscrewed so that beads can be pulled onto the ring and replaced again and again. The rod and the cubes are rhodium-plated (silver-colored). Beads up to a width of 12 mm can be applied to the ring. (Dimensions of the rod between the bands). To shorten the tape, it is easy to make a new hole with a punch plier or a pointed object, a.o. a needle. The remaining piece is simply cut off with scissors. — Please note: The threaded rod and the screw-on parts are not compatible with our other interchangeable ring components, which can also be purchased individually.

2 rhodium-plated Tape clamps for our 7 mm PVC tapes. The tape clamps are slightly bent up, the tape is pushed in and then bent back together with a flat tong. The interchangeable threaded pin are then fastened by the eyelets of the tape clamps. (The picture of the finished ring is for illustration only). The tape clamps can of course also be used for other types of tapes of this size.

2 rhodium-plated tape clamps 16x2 mm for our 16 mm wide cellular rubber bands. The tape clamps are slightly bent, the rubber is pushed in and then bent back together with a flat tong. The interchangeable threaded pin are then fastened by the eyelets of the tape clamps. (The picture of the finished ring is for illustration only). The tape clamps can of course also be used for other types of tapes of this size.

genuine gold-plated ball with female thread as end piece for threaded threaded pin or flashes. The ball is screwed onto the threaded pin or flashes at the end. (Thread threaded pin or “flashes” are to be ordered separately.)