Equipment for exchangeable Colliers + Pendants

The lock holds by counterpressure of the inner part. It is pressed one ax together and is released by pulling on both shutter parts. The closure has an inner diameter of 3 mm and an outdoor diameter of 4 mm. It is particularly suitable for rubber belts, but also for steel rope, textile and other belts. The tapes are simply glued into the closure.

Stainless steel click closure. The lock “clicks” firmly together by counterpressure and is released by pulling on both shutter parts. The closure has an inner diameter of 2 mm and an outdoor diameter of 3 mm. It is particularly suitable for rubber belts, but also for steel rope, textile and other belts. The tapes are simply glued into the closure.

An open, platinum coloured necklace loop for connecting chain and pendant in a solid finish. The inner dimension is approx. 13x5mm. The pendant can easily be “eingeclipt” into the necklace loop.

Stainless steel bayonet closure. The closure is simply plugged together at the place marked by a small notch and then turned. The closure has an inner diameter of 2.1 mm and an outer diameter of just under 3 mm, which means it fits through all hole sizes from 3 mm. Total length 18 mm. It is particularly suitable for rubber belts, but also for steel rope, textile and other belts. The tapes are simply glued into the closure. Total length 18 mm.

The platinum coloured interchangeable pendant is 4 cm tall. The elephant’s eyes are made of black crystals. The pendant can be opened. Beads with a size of up to 18 mm can be inserted in the pendants. The beads can be replaced again and again, so that the pendant can be combined to suit any garment. The eyelets have a size of approx. 3.5 mm. Whether worn short or long on a rubber band, a link chain or simply on a leather strap, this pendant is an eye-catcher. This special offer is the elephant individually depicted. Beads and chains can be ordered separately. See further model photos in the article view....

The platinum coloured, set with clear crystals, changing pendant is 2.5 cm tall. The fox’s eyes are made of black crystals. The pendant can be opened. For this purpose, the right paw is pressed down and pulled to the side. Beads with a size of up to 16 mm can be inserted in the pendants. The beads can be replaced again and again, so that the pendant can be combined to suit any garment. The eyelet has a size of approx. 8x3,5mm. Whether worn short or long on a steel rope collier, rubber band, a link chain or simply on a leather strap, this pendant is an eye-catcher. This special offer is the individually depicted fox. Beads and chains can be ordered separately. See further model photos in the article view....

The platinum coloured interchangeable pendant is 2.5 cm tall. The eyes of the owl are made of black crystals. The pendant can be opened. Beads with a size of up to 16 mm can be inserted in the pendants. The beads can be replaced again and again, so that the pendant can be combined to suit any garment. The eyelet has a size of approx. 8x3,5mm. Whether worn short or long on a rubber band, a link chain or simply on a leather strap, this pendant is an eye-catcher. This special offer is the individually illustrated owl. Beads and chains can be ordered separately... See further model photos in the article view....

Threaded rod with a length of 50 mm platinum coloured. The rod can be used for earrings, pendants and much more. Beads can then be raised on the rod at will. The rod is then closed with a threaded endpiece (to be ordered separately). The threaded threaded pin have a thickness of 1.26 mm. The diameter of the eyelets is 4.2 mm on the outside and just under 1.9 mm inside.

Stainless steel click closure. The lock “clicks” firmly together by counterpressure and is released by pulling on both shutter parts. The closure has an inner diameter of 3 mm and an outdoor diameter of 4 mm. It is particularly suitable for rubber belts, but also for steel rope, textile and other belts. The tapes are simply glued into the closure.

Hollow rubber – rubber hose 4 mm in black. When ordering several meters, the goods are delivered continuously (indefinitely) as far as possible.

PVC hose – hollow PVC PVC 8 mm in black. When ordering several meters, the goods are delivered continuously (indefinitely) as far as possible.

The ends are simply placed on top of each other and the interchangeable rod is inserted. Depending on the tape, these must be punched beforehand. The interchangeable rod has a usable length of 8 mm. Of course, you also have to calculate the double-layered tape. In the detailed view you will find more model photos. This special offer is a rod including the 4 mm crystal ball, which is screwed on. The ball is set with a crystal. The crystal can be ordered in different colours. The threads of the threaded pin are not compatible with the rotary parts from our other removable jewelry series and can only be purchased completely (bar + ball), as special offered here.

This threaded robe is made of stainless steel and has a diameter of approx. 5,5mx6,5mm. It is suitable for screwing on our threaded threaded pin for vertical interchangeable rings or pendants. The roundel is set with a large, sparkling crystal. This can be ordered in different colors. This threaded part is not compatible with the rotary parts from our other removable jewelry series. Compatible with this “top” are all thread bars, starting with the article number ZS-WS-... This is a roundel with thread in the crystal color to be selected. All other parts shown can be ordered separately and serve only as a model example.

This interchangeable rod is made of stainless steel and has a “assemblable” length of 10 mm. It is particularly suitable for our interchangeable rings (a.o. article: ZS-WR, as well as for use with flat strips. In addition, it can also be used for staging supporters. In the detailed view you will find more model photos. This is the one depicted individually. The tops for writing down, as well as other illustrated model parts can be ordered separately. The threads of the threaded pin are not compatible with the rotary parts from our other removable jewelry series. All rotary parts starting with the article number ZS-WT-...

This interchangeable rod is made of stainless steel and has a “assemblable” length of 14 mm. It is particularly suitable for our interchangeable rings (a.o. article: ZS-WR), as well as for use with flat strips. In addition, it can also be used for staging supporters. In the detailed view you will find more model photos. This is the one depicted individually. The tops for writing down, as well as other illustrated model parts can be ordered separately. The threads of the threaded pin are not compatible with the rotary parts from our other removable jewelry series. All rotary parts starting with the article number ZS-WT-...

This interchangeable rod is made of stainless steel and has a “assemblable” length of 12 mm. It is particularly suitable for our interchangeable rings (a.o. article: ZS-WR, as well as for use with flat strips. In addition, it can also be used for staging supporters. In the detailed view you will find more model photos. This is the one depicted individually. The tops for writing down, as well as other illustrated model parts can be ordered separately. The threads of the threaded pin are not compatible with the rotary parts from our other removable jewelry series. All rotary parts starting with the article number ZS-WT-...

This threaded ball is made of stainless steel and has a diameter of 5 mm. It is suitable for screwing on our thread bars for vertical interchangeable rings. This threaded part is not compatible with the rotary parts from our other removable jewelry series. Compatible with this “top” are all thread bars, starting with the article number ZS-WS-...

This threaded ball is made of stainless steel and has a diameter of 5 mm. It is suitable for screwing on our thread bars for vertical interchangeable rings. The sphere is set with a large, clearly sparkling crystal. This threaded part is not compatible with the rotary parts from our other removable jewelry series. Compatible with this “top” are all thread bars, starting with the article number ZS-WS-...

Hollow rubber – rubber hose 5 mm (outer diameter) in black. Hole size approx. 2,8 mm. When ordering several meters, the goods are delivered continuously (indefinitely) as far as possible.

Hollow rubber – rubber hose 3 mm (outer diameter) can be ordered in different colours. Hole size approx. 1 mm. When ordering several meters, the goods are delivered continuously (indefinitely) as far as possible. This special offer is only the hollow rubber band. The pictured Hose closures for 3 mm hollow rubber cord can be found under the heading “Accessories complete”. a.o. article ZS-228 + ZS-229.

1 meter of rubber cord. Thickness 5 mm in royal blue. When ordering several meters, the goods are delivered continuously (indefinitely) as far as possible.

2 rhodium-plated tape clamps 20x2 mm for our 20 mm wide cellular rubber bands. The tape clamps are slightly bent, the rubber is pushed in and then bent back together with a flat tong. The interchangeable threaded pin are then fastened by the eyelets of the tape clamps. (The picture of the finished ring is for illustration only). The tape clamps can of course also be used for other types of tapes of this size.

Threaded rod with a length of 35 mm platinum coloured. The rod can be used for earrings, pendants and much more. Beads can then be raised on the rod at will. The rod is then closed with a threaded endpiece (to be ordered separately). The threaded threaded pin have a thickness of 1.26 mm. The diameter of the eyelets is 4.2 mm on the outside and just under 1.9 mm inside.

Ball 6 mm with female thread as end piece for threaded threaded pin or flashes – color platinum. The ball is screwed onto the threaded pin or flashes at the end. (Thread bars are to be ordered separately.