The approx.12 mm large heart is set all around crystal stones. It has a hole size of approx.8x1.7 mm and fits on our steel rope necklaces up to 3 rows with plug-in fastener, on our swap threaded pin, as well as on some of our PVC tapes (please note the thickness). This special offer is the individually depicted heart. All other pieces of jewellery, which are depicted as examples of use, can be ordered separately. This slider also fits on our slider bracelet (ZS-513).
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The approx.14 mm large slider “Stripe” is completely set with crystal stones on one side. It has a hole size of approx.11.5x2.5 mm and fits on our steel rope necklaces up to 3-row with plug-in fastener, on our interchangeable threaded pin, as well as on many of our PVC tapes (please note the thickness). This special offer is the slider shown individually. All other pieces of jewellery, which are depicted as examples of use, can be ordered separately. This slider also fits our slider bracelets (ZS-512 + ZS-513).
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The 15 mm large slider is equipped with a colored Polaris cabochon. You can select the color. The hole size of the slider is approx.10,3x2,8mm. It fits our steel rope colliers up to 3 rows with plug-in closure, as well as many of our PVC tapes (please note the thickness). This special offer is a single Polaris Cabochon Slider in the base color antique silver. All other pieces of jewellery, which are depicted as examples of use, can be ordered separately. This slider also fits our slider bracelets (ZS-512 + ZS-513). On the color map all available colors are shown.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The approx.13 mm slider “Stripe” has a hole size of approx.10.2x2.5 mm and fits on our steel rope necklaces up to 3-row with plug-in closure, as well as on many of our PVC tapes (please note the thickness). This special offer is the slider shown individually. All other pieces of jewellery, which are depicted as examples of use, can be ordered separately. This slider also fits our slider bracelets (ZS-512 + ZS-513).
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The approx.15 mm large slider “Stripe patterned” has a hole size of approx.11x2.6 mm and fits on our steel rope necklaces up to 3-row with plug-in fastener, as well as many of our PVC tapes (please note the thickness). This special offer is the slider shown individually. All other pieces of jewellery, which are depicted as examples of use, can be ordered separately. This slider also fits on our slider bracelets (ZS-512 + ZS-513).
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The approx.15 mm slider for 12 mm cabochons has a hole size of approx.10.3x2.8 mm and fits our steel rope necklaces up to 3-row with plug-in closure, as well as many of our PVC tapes (please note the thickness). Cabochons with a size of 12 mm can be optimally glued. This special offer is the slider shown individually. All other pieces of jewellery, which are depicted as examples of use, can be ordered separately. This slider also fits our slider bracelets (ZS-512 + ZS-513).
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The unusual slider bracelet has a total length of 20 cm. It is adjustable in size and can be worn up to an arm circumference of 19 cm. The bracelet has a width of 18 mm. It is made of black imitation leather with snake pattern. You can combine this bracelet very nicely with many of our sliders. To do this, you can unscrew the upper band and pull up the sliders. The upper band can be permanently opened and closed and thus the sliders can be replaced again and again. The upper band has a usable length of about 7 cm. It has a width of 8 mm and a thickness of 1.6 mm. Please pay close attention to the hole size of the sliders. This special offer is the individually illustrated black slider bracelet. All other jewellery parts depicted as an example of use can be ordered separately.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
2 rhodium-plated tape clamps 20x2 mm for our 20 mm wide cellular rubber bands. The tape clamps are slightly bent, the rubber is pushed in and then bent back together with a flat tong. The interchangeable threaded pin are then fastened by the eyelets of the tape clamps. (The picture of the finished ring is for illustration only). The tape clamps can of course also be used for other types of tapes of this size.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The change jewelry bracelet has a length of 21.4 cm and a width of 2.5 cm. You can simply put it around the wrist, it snaps together and thus adapts to every wrist. The bracelet is covered with soft black matt silicone and therefore looks very noble. The top is smooth and the inside slightly roughened. It’s got a good hold through here. The bracelet has a small hole in the middle through which our vertical switch threaded pin can be inserted through. (Article numbers: ZS-WS-10 or ZS-WS-12 or ZS-WS-14). These can then be stocked at will. For the vertical interchangeable threaded pin you need the closing elements. These are simply screwed onto the interchangeable rod at the end (a.o. article number: ZS-WT-001, ZS-WT-002 or ZS-WT-003). This special offer is the single bracelet. The vertical changing threaded pin as well as the other jewelry parts can be ordered separately. These can then be stocked at will. (See model in the article detail view).
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Ball 6 mm with female thread as end piece for threaded threaded pin or flashes – color platinum. The ball is screwed onto the threaded pin or flashes at the end. (Thread bars are to be ordered separately.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Rod with double thread, length 35 mm, rhodium plated. You need this rod a.o. to connect PVC flat strips for horizontal interchangeable rings. The beads are attached to the rod and the end parts are screwed on. It’s just the staff. The end parts must be ordered separately.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
gold-plated, short, smooth tip with internal thread as end piece for threaded threaded pin or flashes. The tip is screwed onto the threaded pin or flashes at the end. (Threads or flashes are to be ordered separately.) The tip has a length of 7.8 mm and a diameter of 5.5 mm above.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
genuine gold-plated, smooth cube, ca.4mm, with female thread as end piece for threaded threaded pin or flashes. The tip is screwed onto the threaded pin or flashes at the end. (Thread threaded pin or “flashes” are to be ordered separately.)
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Smooth cube ca.4mm, with female thread as end piece for threaded threaded pin – color platinum. The cube is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.)
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
This rhodium-plated creative pendant is lined with crystal stones all around. It has a hole size of approx.2.6x14 mm and fits on our creative steel rope necklaces up to 7 rows. This pendant is worn individually an absolute eye-catcher. But you can also design it very nicely with beads and tubes.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
This rhodium-plated creative pendant is lined with approx.30 clearly sparkling crystal stones. It has a hole size of approx.2.6x18 mm and fits on our creative steel rope necklaces up to 7 rows. This pendant is worn individually an absolute eye-catcher. But you can also design it very nicely with beads and tubes next to it.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Short, smooth lace with female thread as end piece for threaded threaded pin – color platinum. The tip is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.) The tip has a length of 7.8 mm and a diameter of 5.5 mm above.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Spiral 10x6 mm with female thread as end piece for threaded threaded pin – color platinum. The ball is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.)
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
genuine gilded long lace with internal thread as end piece for threaded threaded pin or flashes. The tip is screwed onto the threaded pin or flashes at the end. (Thread threaded pin or “flashes” are to be ordered separately.)
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Long lace with internal thread as end piece for threaded threaded pin – color platinum. The tip is screwed onto the threaded pin at the end. (Thread threaded pin are to be ordered separately.)
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Rod with double thread, length 50 mm. Colour: gold. The rod is the connecting piece for the bracelet. The beads are attached to the rod and the end parts are screwed on. It’s just the staff. The end parts must be ordered separately.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
Rod with double thread, length 50 mm, rhodium plated. The rod is the connecting piece for the bracelet. The beads are attached to the rod and the end parts are screwed on. It’s just the staff. The end parts must be ordered separately.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
2 rhodium-plated tape clamps 16x2 mm for our 16 mm wide cellular rubber bands. The tape clamps are slightly bent, the rubber is pushed in and then bent back together with a flat tong. The interchangeable threaded pin are then fastened by the eyelets of the tape clamps. (The picture of the finished ring is for illustration only). The tape clamps can of course also be used for other types of tapes of this size.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration
The rhodium-plated, coarse link chain has a thickness of 5x2 mm and a lobster claw clasp closure.
To see the prices you must be a registrated retailer.
retailer registration
Herstellerinformationen retailer registration